Plate Bending - Capacities
The range of sections, plate thickness and configuration that we cold form in various materials is indicated below. However, we must stress that it is only an indication of our capability. If the section you need is not shown please contact us anyway - your design problem is our challenge.
| CAPACITY CHART |
ALL SIZES UP TO |
|
| FLAT BANDS |
 |
350 X 50 |
| FLAT BANDS ON EDGE |
 |
175 X 40 |
| ANGLES TOE OUT |
 |
160 X 160 X 20 |
| ANGLES TOE IN |
 |
150 X 150 X 20 |
| ANGLES AS VEE PULLEYS |
 |
160 X 160 X 20 |
| ANGLES AS INVERTED VEE |
 |
160 X 160 X 20 |
| TEES ON EDGE |
 |
160 X 160 X 20 |
| TEES STALK OUT |
 |
160 X 160 X 20 |
| TEES STALK IN |
 |
150 X 150 X20 |
| CHANNELS TOE OUT |
 |
432 X 102 |
| CHANNELS TOE IN |
 |
432 X 102 |
| CHANNELS X-X AXIS |
 |
203 X 76 |
| BEAMS & JOIST AS RUNWAYS |
 |
406 X 178 |
| BEAMS & JOIST X-X AXIS |
 |
203 X 102 |
| COLUMNS AS RUNWAYS |
|
240 X 240 |
| SQUARES |  |
110 X 110 |
| ROUNDS |  |
125 Diameter |
| TUBES |  |
168.3 O/D x 10 |
| S.H.S. |  |
250 x 150 x 10 |
| R.H.S. |  |
200 X 100 X 8 |
| NON STANDARD | please send drawing | |
| SPIRAL STRINGERS |
Advise plan radius & height |
|
| TEES | Split & straightened from beam & columns | |
| PLATE ROLLING |
3050 x 25 |
|
| PRESS BRAKE | 6500 long x 25 7500 long x 5 |
|
| CONES | Rolled & Pressed |
|
| SQUARE TO ROUND |
Pressed | |
| TRANSITIONS | Pressed | |
| SHEARING | 6000 x 12.5 |
|